Quick answer: A Wi-Fi bridging kit extends internet to a second building by using a point-to-point wireless bridge pair instead of buried cable. The Campad Electronics Wi-Fi Bridging Kit Up To 500m Range ($259.99 AUD) links two buildings up to 500 metres apart using a Ruijie Reyee RG-EST100-E bridge pair, then delivers full WiFi 5 coverage inside the second building via the included RG-EW1200 mesh router. It works with an existing Starlink or NBN connection.
Running an internet cable from your house to a detached shed, granny flat or farm building sounds simple until you get a trenching quote. Digging a 200 or 300-metre trench, hiring an electrician and protecting the cable from rocks, tree roots and future landscaping can cost thousands of dollars and take weeks to organize. For many rural and semi-rural properties in Australia, that cost isn’t just inconvenient, it’s a dealbreaker.
There’s a simpler way to connect a second structure to your existing internet service. Wireless bridging technology has matured to the point where you can reliably send a strong, stable connection across open ground without a single metre of buried cable. Campad Electronics’ Wi-Fi Bridging Kit Up To 500m Range is built specifically for this job, pairing a long-range wireless bridge with a mesh router so the second building gets genuine whole-space Wi-Fi, not just a single weak signal.
In this article we will explain how wireless bridging kits work, what’s included in the Campad Electronics kit and whether this setup is the right fit for your property.
What is a Wi-Fi bridging kit and how does it work?
A Wi-Fi bridging kit creates a wireless point-to-point link between two locations, replacing the need for a physical network cable run between buildings. Instead of trenching cable underground or stringing it overhead, two bridge units communicate directly with each other across open air, provided there’s a reasonably clear line of sight.
The Campad Electronics Wi-Fi Bridging Kit Up To 500m Range uses a pair of Ruijie Reyee RG-EST100-E wireless bridges operating on the 2.4GHz dual-stream band. One bridge connects to your existing Starlink or NBN router at the main building. The second bridge mounts at the remote building and receives that signal wirelessly, at distances of up to 500 metres under good conditions.
Here’s how the setup process works in practice:
- Connect the first wireless bridge to your existing Starlink or NBN router using one of the included PoE adaptors.
- Mount the second bridge at the remote building, positioned with a clear line of sight back to the first bridge.
- Connect the second bridge to the included RG-EW1200 Mesh Router.
- The RG-EW1200 Mesh Router then broadcasts dual-band WiFi 5 coverage throughout the second building.
The kit is designed for straightforward installation. Campad Electronics notes that the setup uses user-friendly interfaces and doesn’t require networking expertise, which matters if you’re installing this yourself on a weekend rather than hiring a technician.
Why does the kit include a mesh router, not just a wireless bridge?
This is a detail worth understanding before you buy. A wireless bridge alone solves the problem of getting a signal to a second building. It doesn’t solve the separate problem of spreading that signal throughout the building once it arrives.
That’s why the Campad Electronics Wi-Fi Bridging Kit Up To 500m Range kit pairs the RG-EST100-E bridge pair with a Ruijie Reyee RG-EW1200 Dual-Band WiFi 5 Mesh Router. The receiving bridge hands the incoming connection off to the RG-EW1200, which then distributes proper dual-band Wi-Fi across the whole space. For a single-room shed, this might not matter much. For a granny flat, workshop or home office with multiple rooms or an open floor plan, it’s the difference between usable Wi-Fi everywhere and a weak signal in one corner.
Choose this kit if you need reliable coverage across an entire secondary structure, not just a single connected device sitting right next to a receiver.
What’s included in the Wi-Fi Bridging Kit Up To 500m Range?
The kit arrives as a complete package, so there’s no need to source additional networking hardware separately. It includes:
- 1 × Ruijie Reyee RG-EW1200 Dual-Band WiFi Mesh Router
- 1 × pair of Ruijie Reyee RG-EST100-E 2.4GHz dual-stream 500m wireless bridges
- 1 × pair of PoE adaptors
- 1 × CAT5e outdoor UV-stabilised pre-made patch cable, 10m
- 1 × CAT5e network patch lead (RJ45, blue), 1m
The PoE adaptors mean each bridge can run cleanly off a single network cable, simplifying power arrangements at both ends. The outdoor-rated, UV-stabilised CAT5e cable is included for the short run typically needed to connect a bridge unit mounted outside to equipment indoors and it’s built to withstand Australian sun and weather exposure.
What are the best use cases for a wireless bridging kit?
Wireless bridging kits like this one are built for situations where running cable is impractical, expensive or simply overkill for the distance involved. Common use cases include:
- Extending Starlink or NBN from a main house to a second building on the same property
- Rural and remote properties where trenching a long cable isn’t practical or affordable
- Sheds, workshops and garages that need reliable internet for tools, security systems or entertainment
- Granny flats and guest houses that need their own independent Wi-Fi coverage
- Home offices and studios set apart from the main house
- Farm buildings and outbuildings spread across larger blocks
- Multi-building sites that need seamless connectivity between structures
If your second building sits within 500 metres of your main connection and you have a reasonably clear line of sight between the two points, this setup is typically far more cost-effective than trenching.
Does the kit work with Starlink and NBN?
Yes. The Campad Electronics Wi-Fi Bridging Kit Up To 500m Range is designed to integrate with an existing Starlink or NBN internet connection. It’s important to note that the Starlink system itself is not included in this kit; you’ll need an active Starlink or NBN service already running at your main building before adding the bridging kit to extend that connection outward.
What affects the maximum range of the wireless bridge?
The RG-EST100-E bridge pair is rated for a maximum range of up to 500 metres, but that figure depends on real-world conditions. Line of sight between the two bridge units matters most. Trees, hills, sheds or other structures sitting between the two buildings can reduce effective range. Local interference and terrain also play a role.
Choose this Wi-Fi Bridging Kit Up To 500m Range if your two buildings have a reasonably open sightline between them. If there are major obstructions along the path, it’s worth assessing mounting height options (such as eaves, poles or roof lines) to maximize line of sight before installation.
How much does the Wi-Fi Bridging Kit Up To 500m Range cost and how is it shipped?
The Wi-Fi Bridging Kit Up To 500m Range is priced at $259.99 AUD, inclusive of GST where applicable. Campad Electronics issues a tax invoice with every order.
Domestic shipping within Australia costs $9.99, with delivery typically taking up to 14 working days, though most orders arrive sooner. International customers should contact Campad Electronics directly regarding overseas shipping and are responsible for any applicable taxes and customs fees in their destination country.
Frequently asked questions
How far can the Wi-Fi Bridging Kit Up To 500m Range transmit a signal?
The Ruijie Reyee RG-EST100-E wireless bridge pair is rated for a maximum range of up to 500 metres. This figure assumes a clear line of sight between the two bridge units; obstacles like trees, buildings or hilly terrain can reduce the effective range.
Does this kit include a Starlink dish or NBN modem?
No. The Wi-Fi Bridging Kit Up To 500m Range extends an existing Starlink or NBN connection; it does not include the Starlink system itself. You need an active Starlink or NBN service at your main building before installing this kit.
Do I need networking experience to install the kit?
No. Campad Electronics designed the kit with user-friendly interfaces and a simple installation process, so no professional networking expertise is required. The setup follows four basic steps: connecting the first bridge to your router, mounting the second bridge at the remote building, connecting it to the mesh router and confirming coverage.
What’s the difference between the wireless bridge and the mesh router in this kit?
The RG-EST100-E wireless bridge pair handles the long-distance, point-to-point link between the two buildings. The RG-EW1200 Mesh Router then takes that incoming connection and distributes proper dual-band WiFi 5 coverage throughout the second building, rather than leaving a single weak signal point.
How much does the Wi-Fi Bridging Kit Up To 500m Range cost and what’s the delivery time?
The kit costs $259.99 AUD, including GST where applicable. Domestic shipping within Australia is $9.99, with delivery taking up to 14 working days, though most orders arrive sooner.
Getting your second building online
Trenching cable across a property is expensive, disruptive and often unnecessary when a wireless bridge pair can do the same job in a weekend. The Campad Electronics Wi-Fi Bridging Kit Up To 500m Range combines a 500-metre wireless bridge pair with a proper mesh router, so your shed, granny flat, farm building or home office gets genuine coverage, not just a single connected point.
If your second building sits within range and you have a workable line of sight, this kit offers a practical way to extend the Starlink or NBN connection you already have. Visit Campad Electronics to check current stock and place an order.
